Table of Contents
Advertisement
On this page, you can either scan a wireless network to connect to or enter a wireless network's
parameters manually. To scan a wireless network, refer to
enter the parameters manually, see the following.
1.
Select Enable to enable your camera's wireless function.
2.
Click Manually, and you will see the following screen.
3.
In the Wireless Network Name field, enter the name of the wireless network to which your
camera is ready to connect.
NC220
Day/Night Cloud Camera, 300Mbps Wi-Fi
NC230
HD Day/Night Wi-Fi Cloud Camera
NC250
HD Day/Night Cloud Camera, 300Mbps Wi-Fi
4.3.3 Basic > Wireless
23
Connection. To
Advertisement
Table of Contents
