Position Your Camera - TP-Link NC220 User Manual

Step 2. Download and install the tpCamera app.
You can download the free tpCamera app from the App Store or Google Play. You can also scan
the QR code below to download the tpCamera app.
Step 3. Add the camera to your TP-LINK cloud account.
Launch the tpCamera app, log in with your TP-LINK cloud account or create one if you do not
have an account. Then follow the app instructions to add your new camera to your account.
When you reach the My Cam page, you have successfully added your camera and can start to
use your camera.

3.2 Position Your Camera

Before positioning your camera, please keep these safety guidelines in mind:
 Keep your camera out of reach of children and pets.
 Use your camera only indoors, and keep it out of direct sunlight. Make sure its operating
temperature is in the range of 0-40°C (32-104°F).
 Pick a location which is close enough to a wall outlet.
 Use only the power adapter that comes with this camera in the package.
You can place your camera to your desired location. Just unplug and replug it without having to go
through the app's setup again, and then you can use it in a wired or wireless way as you've set in
the app's setup process. If you use the camera wirelessly, please place the camera within the
coverage of your wireless network. You can place the camera in various ways:
 Place it on a flat surface.
 Stick it with the included adhesive.
 Mount it to a wall or ceiling.
Detailed instructions on mounting your camera to a wall or ceiling are shown as follows. Before
you start to mount the camera, prepare two screws which meet the following requirements.
NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi
NC230
NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi
OR
8
HD Day/Night Wi-Fi Cloud Camera