Advertisement
GOT1000 Startup Guide
GT11 Series-to-FX Connection
Overview:
This document provides a simple guide and reference for setting up the
GT11 Series Graphic Operation Terminal (GOT) hardware and firmware for
use with an FX Series PLC.
Hardware Introduction:
The GT11 Series are 5.7", 320 x 240 dot resolution, three built-in
communication channel GOT1000 Series touch panel interfaces. GT11
Series terminals also have Compact Flash card interfaces and a Reset button
built-in. The models that are connectable to FX PLCs are the following:
Model
GT1155-QTBD
GT1155-QSBD
GT1150-QLBD
For new GT11** Series terminals, included in the box should be the
GT11** (A), and a sealed plastic bag (B) containing 1 rubber Dust-/Water-
Proof Packing, 4 metal Mounting Brackets, and 4 M4 Mounting Screws.
A
Cabling:
Power
All GT11 Series GOTs require an external 24V DC
power supply to be connected to the Power Terminals on the
back of the GOT.
Communication
For the GT11 terminal to communicate with an FX Series PLC, a
communication cable is required to connect the built-in communication
interfaces with the Programming Port (RS-422 8-pin Mini-DIN) or other
Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.
Display Type
256 Color TFT
256 Color STN
16-gradient Grayscale STN
Comm. IF
USB (slave)
RS-232C
RS-422
B
2
Ver. A
Power
24V DC
Advertisement
