Mitsubishi Electric LOSSNAY PZ-25RF8-E Handbook page 28

2 Damper control for each system
The control indicated below can be performed according to the system that is paired
GUp to two of the Lossnay remote controllers PZ-60DR-E, PZ-41SLB-E, and PZ-52SF-E can
be used in the same group, but they cannot be used together with a different remote con-
troller. When using two remote controllers, be sure to use the same model of remote con-
Caution
troller.
GPZ-41SLB-E cannot be used in M-NET control. When controlling Lossnay in M-NET control,
use PZ-60DR-E or PZ-52SF-E.
System
Stand-alone/multi-
ple Lossnay and
Lossnay remote
controller: PZ-
60DR-E
Stand-alone/multi-
ple Lossnay and
Lossnay remote
controller: PZ-
41SLB-E
System interlocked
with Mr. Slim
Level signal/pulse
signal output
device and external
device only
Stand-alone/multi-
ple Lossnay and
Lossnay remote
controller: PZ-
60DR-E
Stand-alone/multi-
ple Lossnay and
Lossnay remote
controller: PZ-
52SF-E
M-NET
Lossnay central
control system
M-NET
System interlocked
with City Multi
indoor units
Remote controllers
System controllers
Lossnay remote controller
PZ-60DR-E
Lossnay remote controller
PZ-41SLB-E
A-control remote controller
K-control remote controller
(Remote controller connection
prohibited with Lossnay )
None
Lossnay remote controller
PZ-60DR-E
Lossnay remote controller
PZ-52SF-E
M-NET controller
ME remote controller
PAR-F27MEA,
MA remote controller
PAR-20/21MAA
The "Function selector" button of the remote controller
permits ventilation mode switching for automatic,
Lossnay, and bypass ventilation. Bypass ventilation is
set at the time of night purge operation, and ventilation
mode switching is not possible.
The "Function selector" button of the remote controller
permits ventilation mode switching for automatic,
Lossnay, and bypass ventilation.
Fixed to automatic ventilation.
Fixed to automatic ventilation.
The "Function selector" button of the remote controller
permits ventilation mode switching for automatic ,
Lossnay, and bypass ventilation. Bypass ventilation is
set at the time of night purge operation, and ventilation
mode switching is not possible.
The "Function selector" button of the remote controller
permits ventilation mode switching for automatic ,
Lossnay, and bypass ventilation.
The "Operation mode" button of the system remote con-
troller and the centralized controller permits ventilation
mode switching for automatic , Lossnay, and bypass
ventilation.
(The schedule timer, ON/OFF remote controller, and the
group remote controller do not permit ventilation mode
selection.)
Fixed to automatic ventilation.
— 28 —
Ventilation mode