Service And Maintenance; Adjustments - Ferroli PEGASO PRO 6 Instructions For Use, Installation And Maintenence

3 SERVICE AND MAINTENANCE

All of the adjustments, commissioning operations and
periodic checks described below must be performed by
an authorized technician in compliance with current re-
gulations. FERROLI declines all liability for property da-
mage or injuries caused by unauthorized persons tam-
pering with the unit.

3.1 ADJUSTMENTS

3.1.1 Gas conversion
Conversion of the unit to a type
of gas other than the factory
setting must be performed by
an authorized technician, using
original components and in
compliance with current regu-
lations in the country where the
unit will be used.
The unit can operate with methane gas, LPG or Propa-
ne-Air. It is factory-set for one of the two types of gas, as
indicated on the packaging and technical data plate. To
operate the unit with another type of gas, a conversion
kit must be used.
fig. 10 -
fig. 11 -
62
EN
cod. 3542C020 - Rev. 00 - 09/2022
PEGASO PRO
fig. 12 -
(x2)
fig. 13 -
fig. 14 -
(NG/LPG)
fig. 15 -