Service And Maintenance - Ferroli ZEFIRO ECO Instructions For Use, Installation & Maintenance

ZEFIRO ECO

3 SERVICE AND MAINTENANCE

All of the adjustments, commissioning operations and
periodic checks described below must be performed by
an authorized technician in compliance with current re-
gulations. FERROLI declines all liability for property da-
mage or injuries caused by unauthorized persons tam-
pering with the unit.
3.1 ADJUSTMENTS
3.1.1 Gas conversion
Conversion of the unit to a type
of gas other than the factory
setting must be performed by
an authorized technician, using
original components and in
compliance with current regu-
lations in the country where the
unit will be used.
The unit can operate with methane gas or LPG. It is fac-
tory-set for one of the two types of gas, as indicated on
the packaging and technical data plate. To operate the
unit with another type of gas, a conversion kit must be
used.
fi g. 10 -
fi g. 9 -
cod. 3541P790 - Rev. 00 - 02/2019
fi g. 11 -
(x2)
fi g. 12 -
fi g. 13 -
EN
51