Riello BS2F Installation, Use And Maintenance Instructions page 40

Combustion
If the combustion values measured before starting maintenance
do not comply with applicable legislation or do not indicate effi-
cient combustion, consult the Tab. C on page 16 or contact our
Technical Support Service to implement the necessary adjust-
ments.
Let the burner run at full power for about 10 minutes, correctly
calibrating all the components indicated in this manual. Then car-
ry out a combustion check verifying:
– Percentage of CO (%);
2
– CO content (ppm)
– NOx content (ppm)
– Ionisation current (µA)
– Smoke temperature at the flue
20071805
Maintenance
19 GB