ABB INSITE PRO M COMPACT SCU100 User Manual page 50

50 SCU100 INSITE PRO M COMPACT USER MANUAL
SNMP
To enable version 3 mark the v.3 checkbox, enter UDP port number, password (at least 8 signs), security
name and engine ID (at least 12 characters in hexadecimal format). Port number must be 161 or greater
than 1024 (the same as for versions v.1/2c).
Username and password perform the authentication needed to authenticate and encrypt the request
to access data using SNMPv3. For the authentication the MD5 protocol is used and messages are
additionally encrypted with the DES algorithm.
SNMP trap
Manage SNMP trap settings. Remember to enable "SNMP trap" in "Configuration - Alarms".
Modbus
Here you can make changes to the MODBUS TCP and MODBUS RTU settings
Modbus TCP settings
Enable Modbus TCP
TCP port
Modbus RTU settings
Modbus ID
Baud rate
Parity
Enable Modbus TCP communication
Configure TCP port
Select Modbus ID
Select baud rate
Select parity setting: "None", "Odd" or "Even"