Repairs; Troubleshooting - BOMANN GS 365 Instruction Manual

CAUTION: : : : CAUTION
CAUTION CAUTION
• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.
C C C C lean the lean the appliance appliance including including interior regularly:
lean the lean the appliance appliance including including
• Remove the appliance content and storage at a cool location.
• Use warm water and a mild detergent for cleaning the appliance interior as well as the exterior.
• After everything was thoroughly dried, you can restart the operation.
A wrong or improperly performed repair brings danger to the user.
Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged power cord
must be changed only by a qualified electrician.
Before you contact an authorized specialist Before you contact an authorized specialist
Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Possible cause Possible cause
Problem Problem Possible cause Possible cause
The appliance is - Is the unit not connected to mains power?
not working
properly or at all. - Is the temperature control properly set?
- Is the place unqualified?
- Does the content prevent the appliance
door from closing properly?
- Are the ventilation openings clear of ob-
struction?
Appliance cools Is the temperature control set properly?
too much.
The food is too - Is the temperature control set properly?
warm. - Was the appliance door open for an ex-
tended period?
The food is too - Is the temperature control set properly?
warm. - Was the appliance door open for an ex-
tended period?
- Was large quantity of food placed in the
appliance within the last 24 hours?
- Is the appliance near a heat source?
interior regularly:
interior regularly: interior regularly:

Repairs

Repairs
Repairs Repairs

Troubleshooting

Troubleshooting Troubleshooting Troubleshooting
Solution Solution
Solution Solution
- Insert the plug properly in the contact socket.
Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install the
appliance freely.
Check the temperature setting.
- Check the temperature setting.
- Open the door only as long as necessary.
- Check the temperature setting.
- Open the door only as long as necessary.
- Turn the temperature control to a colder set-
ting temporally.
- Check the location (see "Installation").
24