Advertisement
INSTALLATION INSTRUCTIONS
Installation
Leveling
WARNING: Use the leveling legs to level the
dispenser only. Do not use them to adjust
dispenser height. Do not extend them higher
than necessary.
1
Position the dispenser on the counter top. Level it left
to right and front to back by turning the bottom of the
legs.
Connect the Water Supply
2
Flush the water supply line prior to installation to
3
back of the unit. Leave the water supply valve closed
until power is connected.
Connect the Power Cable - 120 Volt Units
WARNING: Connect the power cord to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician.
Do not modify the power plug. Do not use an
is damaged.
4
Connect the power cord to the appropriate type of
electrical outlet.
Power Up the Unit
5
Turn on the water supply valve.
6
Make sure that the circuit breaker supplying power to
the dispenser is on.
7
Turn the toggle switch on the back of the dispenser to
leaks.
Back of unit
Back of
unit
II23
Style may vary
120517NC
Advertisement
