Advertisement
PROGRAMMING GUIDE
Product % Ratio
1
This function sets the ratio of product powder dispensed. The higher the powder ratio, the richer the product
dispensed. The range is from 10% to 100% (7 grams per 10%). The powder ratio for each button is set
independent of the others.
2
Make sure the rear toggle switch is in the ON position and the ready light(s) are on.
3
Press and hold the STOP/WASH button (for about 10 seconds) until all
the lights start blinking, then release.
4
Press and hold the desired PUSH button for approximately one second,
then release.
5
The current setting will be indicated by the number of times the light
6
To exit without changing the powder ratio, press one of the other PUSH
buttons.
7
To change the product throw, press and hold the desired PUSH button
8
Press any other PUSH button to set and exit.
# of Flashes
Ratio
1
10% (7 gm)
2
20% (14 gm)
3
30% (21 gm)
4
40% (28 gm)
5
50% (35 gm)
6
60% (42 gm)
7
70% (49 gm)
8
80% (56 gm)
9
90% (63 gm)
10
100% (70 gm)
TABLE 2
PG14
Advertisement
