Save & Exit - MSI TOMAHAWK PLUS B350 Manual

fDevice Select [Auto]
Sets the version of the TPM device. The version must be identical with the device.
Sets to Auto, system will detect the TPM 2.0 or TPM 1.2 model automatically.
Chassis Intrusion Configuration
f
Press Enter to enter the sub-menu.
fChassis Intrusion [Disabled]
Enables or disables recording messages while the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.
Save & Exit
Discard Changes and Exit
f
Exit BIOS setup without saving any change.
Save Changes and Reboot
f
Save all changes and reboot the system.
Save Changes
f
Save current changes.
Discard Changes
f
Discard all changes and restore to the previous values.
Restore Defaults
f
Restore or load all default values.
Boot Override
f
The installed boot-able devices will appear on this menu, you can select one of them to
be the boot device.
49
BIOS Setup