MSI TOMAHAWK PLUS B350 Manual page 46

Hide thumbs Also See for TOMAHAWK PLUS B350:
Table of Contents

Advertisement

fInternal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press Enter to enter
the sub-menu. This sub-menu will appear when Windows 10 WHQL Support is
enabled.
fSecure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press Enter
to enter the sub-menu. This sub-menu will appear when Windows 10 WHQL
Support is enabled.
Wake Up Event Setup
f
Sets system wake up behaviors for different sleep modes. Press Enter to enter the
sub-menu.
fWake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS]
[OS]
fResume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled]
[Disabled]
fDate (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system
will automatically resume (boot up) on a specified date/hour/minute/second in
these fields (using the + and - keys to select the date & time settings).
fResume By PCI/ PCI-E Device [Disabled]
Enables or disables the wake up function of installed PCI/ PCI-E expansion cards,
integrated LAN controllers or USB devices which are supported by third party
integrated chips.
[Enabled]
[Disabled]
fResume by USB Device [Disabled]
Disables or enables system wake up from S3/S4 by USB device.
[Enabled]
[Disabled]
fResume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled]
[Disabled]
46
BIOS Setup
Activates the following items, set wake up events of these items.
The wake up events will be defined by OS.
Enables the system to boot up on a scheduled time/ date.
Disables this function.
Enables the system to be awakened from the power saving modes
when activity or input signal of PCI/ PCIe device is detected.
Disables this function.
Enables the system to be awakened from sleep state when activity of
USB device is detected.
Disables this function.
Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
Disables this function.

Advertisement

Table of Contents
loading

Table of Contents