MSI TOMAHAWK PLUS B350 Manual page 47

fResume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
fHot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
Secure Erase+
f
Enables or disables Secure Erase+ function. Secure Erase+ is the best way to
effectively wipe all data from a SSD. Please note that data of SSD will be erased after
enabling Secure Erase+.
Realtek PCIe GBE Family Controller
f
Shows driver information and configuration of the ethernet controller parameter.
Boot
Sets the sequence of system boot devices.
Full Screen Logo Display [Enabled]
f
Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
Bootup NumLock State [On]
f
Select the keyboard NumLock state upon bootup.
Info Block effect [Unlock]
f
Sets the state of Help information block.
[Unlock] Sliding effect.
[Lock] Fix the Help information block on the screen.
AUTO CLR_CMOS [Disabled]
f
Enables or disables the CMOS data to be resumed automatically when the system
cannot boot to OS and reboot repeatedly.
Boot Mode Select [LEGACY+UEFI]
f
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 10 WHQL Support is enabled.
[UEFI]
[LEGACY+UEFI]
FIXED BOOT ORDER Priorities
f
Sets device priority for system boot.
Enables UEFI BIOS boot mode support only.
Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
47
BIOS Setup