Steps
1
Align the notch on the memory module with the tab on the memory-module slot.
2
Slide the memory module firmly into the slot at an angle.
3
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next step
1
Install the battery.
2
Install the
base
cover.
3
Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
About this task
The figure indicates the location of the WLAN card and provides a visual representation of the removal procedure.
28
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.