Dell P80G Service Manual page 47

3 Remove the battery.
4 Remove the solid state
5 Remove the HDD.
6 Remove the WLAN card.
7 Remove the WWAN card.
8 Remove the inner frame.
About this task
The figure indicates the location of the smart card reader board and provides a visual representation of the removal procedure.
Steps
1 Locate the Smart card reader board on your computer.
2 Open the latch and disconnect the Smart card reader board cable from the system board.
3 Remove the four (M2X3) screws that secure the smart card reader board to the computer.
4 Lift the smart card reader module out of the computer.
drive.
Disassembly and reassembly 47