Technical Specifications - Ford Focus Owner's Handbook Manual

TECHNICAL SPECIFICATIONS

Vehicle fluids
Do not use fluids which do not meet the specifications or requirements defined.
Use of unsuitable fluids may lead to damage which is not covered by your Warranty.
Item
Engine oil - except vehicles
with a 2.5L Duratec-RS
engine
Engine oil - vehicles with a
2.5L Duratec-RS engine
Power steering fluid
Antifreeze
Brake fluid
1
Providing it meets the specification defined by WSS-M2C913-C, you can also use
Ford Engine Oil or an alternative engine oil.
2
On vehicles with a 2.5L Duratec-RS engine, use only this oil.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 (except
vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by either
ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer engine
cranking periods, reduced engine performance, reduced fuel economy and increased
emission levels.
Castrol engine oil recommended.
E115472
Maintenance
CAUTION
Recommended fluid
1
Castrol Engine Oil
Fully Synthetic Engine Oil
2
0W40
Ford or Motorcraft Power
Steering Fluid
Motorcraft SuperPlus Anti-
freeze
Ford or Motorcraft Super
DOT 4 Brake Fluid
188
Specification
WSS-M2C913-C
WSS-M2C937-A
WSS-M2C204-A2
WSS-M97B44-D
WSS-M6C57-A2