Ford Focus Owner's Handbook Manual page 104

Programming the functions
Program 1 and Program 2
Program 1
[07:55]
Monday
Tuesday
Wednesday
Thursday
Friday
E74468
1. Use the rotary control to enter the
main menu.
2. Highlight Program 1 and press the
SET/RESET button.
3. Highlight the day on which the heater
should warm up the vehicle.
4. Press the SET/RESET button to
confirm the selection. A cross appears
in the box next to the day to show that
this day is selected.
5. Continue in the same way to select all
the days on which the heater should
warm up the vehicle.
6. To set the time at which the vehicle
should be warmed up, highlight the
time at the top of the display and
press the SET/RESET button. The
hours start to flash.
7. Use the rotary control to adjust the
hours to the desired setting.
8. Press the SET/RESET button to
confirm the setting. The minutes start
to flash.
9. Use the rotary control to adjust the
minutes to the desired setting.
Climate control
10.
11.
E74469
You can use the function Program 2 to
set a second cycle, for example different
times on different days or twice on the
same day. The programming procedure
is the same as for the function Program
1.
Programming the function
One-Time
1. Highlight One-Time and press the
2. Use the rotary control to adjust the
3. Press the SET/RESET button to
4. Use the rotary control to adjust the
5. Press the SET/RESET button to
6. Press the SET/RESET button to exit
102
Press the SET/RESET button to
confirm the setting.
Press the SET/RESET button to
exit the menu.
Parkheater
Program 1
07:55
01:12:2006
OK = change
SET/RESET button. The hours start
to flash.
hours to the desired setting.
confirm the setting. The minutes start
to flash.
minutes to the desired setting.
confirm the setting.
the menu.