H3C S7500E Series Command Reference Manual page 9

oap reboot slot slot-number
In IRF mode:
oap reboot chassis chassis-number slot slot-number
View
User view
Default level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides. (In standalone mode)
chassis chassis-number slot slot-number: Specifies a card on an IRF member switch. The chassis-number
argument refers to the ID of the IRF member switch, and the slot-number argument refers to the number of
the slot where the card resides. (In IRF mode)
Description
Use the oap reboot command to reset the system on an OAP card.
Examples
# In standalone mode, reset the system on the OAP card in slot 3.
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
# In IRF mode, reset the system on the OAP card in slot 5 of the device with the member ID of 2.
<Sysname> oap reboot chassis 2 slot 5
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
2