H3C S7500E Series Command Reference Manual page 15

Table 3 Output description
Field
In-Interface
ACFP rule total number
ClientID
Policy-Index
Rule-Index
SMAC
DMAC
StartVLAN
EndVLAN
PackRate
SIP
SMask
SPort
DIP
DMask
DPort
Protocol
Fragment
ToS
Pre
DSCP
TCPFlag
TCPMask
Description
Inbound interface of the packet
Total number of ACFP rules
Client ID, index of client list
Policy index
Rule index
Source MAC address
Destination MAC address
Start VLAN of the source VLAN
End VLAN of the source VLAN
Value of the restricted rate of packets, in kbps.
Source IP address
Inverse mask of source IP address
Source port number
Destination IP address
Inverse mask of destination IP address
Destination port number
Protocol of the packet: GRE, ICMP, IGMP, IPinIP, OSPF, TCP, UDP, IP,
and so on.
Whether the packet is a fragment:
•
true: Indicates the packet is a fragment
•
false: Indicates all the packets, not concerned about whether the
packet is a fragment or not
Type of Service, indicated by a number in the range of 0 to 15
Packet precedence, indicated by a number in the range of 0 to 7
Differentiated Services Code Point, indicated by characters for Be, Ef,
Af11, Af12, Af13, Af21, Af22, Af23, Af31, Af32, Af33, Af41,
Af42, Af43, Cs1, Cs2, Cs3, Cs4, Cs5, Cs6, and Cs7 and indicated
by a number in the range of 0 to 63 for other code points
The value is six bits, which represents URG, ACK, PSH, RST, SYN, and
FIN respectively from low to high.
The value is six bits, which represents URG mask, ACK mask, PSH
mask, RST mask, SYN mask, and FIN mask respectively from low to
high.
For each bit, the value 1 indicates that this bit is concerned, and the
value 0 indicates that this bit is not concerned.
8