H3C S7500E Series Command Reference Manual page 12

View
Any view
Default level
1: Monitor level
Parameters
client client-id: Displays the policy sent by the specified ACFP client, where client-id is the ACFP client ID,
in the range of 1 to 2147483647.
policy-index: Policy index, in the range of 1 to 2147483647.
dest-interface interface-type interface-number: Displays all the policies that use the specified interface
(destination interface) for connecting to the ACFP client, where interface-type interface-number is the
interface type and interface number.
in-interface interface-type interface-number: Displays all the policies that use the specified interface as
the inbound interface, where interface-type interface-number is the interface type and interface number..
out-interface interface-type interface-number: Displays all the policies that use the specified interface as
the outbound interface, where interface-type interface-number is the interface type and interface
number.
active: Displays active policies only.
inactive: Displays inactive policies only.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display acfp policy-info command to display the ACFP policy information.
Note that:
• When you use this command to display the policy information sent by the specified ACFP client, if
you specify the policy-index argument, the command displays the information about the policy
whose number is policy-index applied by the ACFP client with an ID of client-id. Otherwise, the
command displays the information about all the policies sent by the ACFP client with an ID of
client-id.
If neither the active nor inactive keyword is specified, the command displays all the active or
•
inactive policies.
• If no argument is specified, the command displays the information about all the policies.
Examples
# Display the information about the effective policies for all the packets that use GigabitEthernet1/0/1
as the inbound interface.
<Sysname> display acfp policy-info in-interface gigabitethernet 1/0/1 active
ACFP policy total number: 1
ClientID: 3 Policy-Index: 2
5