Outgoing Call Configuration In Elastix - Matrix Telecom SETU VTEP Configuration Manual

Outgoing Call Configuration in Elastix:

 Open Outbound Routes.
 In Route Name field configure any desired Rule Name ( interop name used in this
Example)
 In Dial Pattern field configure desired number pattern which has to be routed via VTEP
(_1. Used in this example, all Outgoing numbers with prefix 1 has to be routed via VTEP)
Prefix can be used before dialing the desired number. ( 9 used in this example)
 Configure desired caller id in Caller ID field
 In Trunk Sequence for Matched Routes configure the SIP trunk which we created.(In
this example, we have created VTEP)
 Click on Submit Changes and Apply Configuration Changes Here as well.
SETU VTEP configuration guide for Elastix Page | 7