Table of Contents
Advertisement
7. Go into Home > Sever Settings > Cluster Configuration and click on AddCluster
node.
8. Complete the add cluster node wizard, selecting the new node which will appear
in the selection box, and enter the supervisor password where prompted (the
default is supervisor). Upon completion of the wizard, the new node will reboot
and join the cluster.
Finalizing and verifying the server configuration
On the new server:
Procedure
1. Navigate to Home > Status & Monitoring > System Monitor to verify the server
status:
If the server is operating normally, and is not displaying any alarm conditions,
■
run a backup to capture the revised configuration, and then download another
diagnostic to support. Permanent license keys for the new server will be
provided within 15 days.
If the server is not operating normally for any reason, contact support for
■
assistance.
2. Navigate to Home > Server Settings > Cluster Configuration to verify the cluster
configuration status. Ensure that the cluster is shown as Online and Robust and has
the correct number of nodes.
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Appendix A: Server replacement procedures
Finalizing and verifying the server configuration
98
Advertisement
Table of Contents
