10/100 Private Ethernet Ports; Ge Ethernet Network Ports - Hitachi 3090 G2 Hardware Reference Manual

Status/Activity (per port)
Status
Activity

10/100 private Ethernet ports

The 10/100 Private Ethernet Network ports function as an unmanaged switch for the
private management network (refer to the Network Administration Guide for more
information on the private management network). These ports are used by the server
and other devices (such as an external SMU and other cluster nodes) to form the private
management network. There are no internal connections to the server from these ports;
instead, when joining a server to the private management network, you must connect
from one of these ports to the management interface port on the server.
The 10/100 ports operate at speeds of up to 100 megabits per second, and require the
use of a standard RJ45 cable connector.
The 10/100 Private Management Ethernet Network ports are labeled as shown next:
Figure 10 10/100 Private Management Network Ethernet Ports Label
Once connected, each 10/100 port has two indicator LEDs; one green and one amber.
These LEDs provide link status and network activity status information as follows:
Status/Activity (Per Port)
Status
Activity

GE Ethernet network ports

Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Green
(on, not
flashing)
Green off
Amber flashing
Amber off
Green
(On, not
flashing)
Green Off
Amber Flashing
Amber Off
Chapter 5: Hitachi NAS Platform server components
Meaning
FC link present
No link
Data activity
No data activity
Meaning
10 or 100 Mbps link present
No link
Network activity
No network activity
10/100 private Ethernet ports
43