Table of Contents
Advertisement
Table 10 Server rear panel components descriptions
Item
Connectivity
1
Clustering ports 10 GbE
2
10 GbE network ports
3
Gigabit Ethernet network
ports
4
10/100 Ethernet port
5
Storage or FC switch
6
n/a
7
Power supply units:
PSU 1
PSU 2
8
I/O ports
9
I/O ports
10
RS-232
11
Video port
12
ETH0 1000baseT Ethernet
(gray logo)
13
ETH1 1000baseT Ethernet
(yellow logo)
Chapter 5: Hitachi NAS Platform server components
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Quantit
y
2
For cluster management and
heartbeat, connect to:
Two way configuration: Connect to
■
corresponding cluster server ports
(left port to left port and right port
to right port).
N-way configuration: Connect to 10
■
GbE switch.
2
Connection to external 10 Gbps
Ethernet data network.
6
Connection to external Ethernet data
network.
5
Connection to private management
network.
4
Connection to disk arrays or (where
present) to the FC switches.
3
Status LEDs (NVRAM, power, and
server), and Power and Reset buttons.
2
Connect to the rack's Fault group:
PSU 1 to Fault group A
■
PSU 2 to Fault group B
■
2
Keyboard (purple) and mouse (green)
ports. (Reserved for Customer Service
Engineer access only.)
2
USB port. (Reserved for Customer Service
Engineer access only.)
1
Management interface. (Reserved for
Customer Service Engineer access only.)
1
Video management interface port.
(Reserved for Customer Service Engineer
access only.)
1
External system management. Connect
to the customer's management switch.
1
Management port. Connect to the
rack's internal Ethernet switch.
Server rear panel
Description
39
Advertisement
Table of Contents
