ABB M2233 Series Manual page 19

ABB-Welcome M
Fig. 10 Activating custom function
The program button can be configured with different functions , e.g. call to guard unit,
intercom call or control switch actuator. And its default function is the release of the
2nd-lock, which is connected with terminals COM-NC-NO of an outdoor station.
If no function is assigned to the program button, there will be no action after pressing
this program button.
Only the existing intercom call list & switch actuator list can be assigned for the program
button.
No. Functions
1
If the function "release 2
"Open door" icon will be displayed when you press the program button.
2 If the function "control switch actuator' is assigned to the program button,
the "Actuator" icon will be displayed when you press the program button.
3 If the function "make an intercom call" is assigned to the program button,
the call will be activated directly when you press the program button.
4 If function "call guard unit" is assigned to the program button, the call will
be activated directly when you press the program button.
|
4
nd
-lock" is assigned to the program button , the
Operation
— 18 —