Operation - Husqvarna TS 112 Operator's Manual

4. Attach the black cable to the negative (-) terminal on
the battery and install the nut and the screw.
Introduction
WARNING:
safety chapter before you use the product.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.
To fill fuel
WARNING:
flammable. Be careful and refuel outdoors,
Fuel safety on page 11 .
refer to
WARNING:
a support area.
CAUTION:
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline. Do not use
gasoline that contains more than 10% ethanol.
• Do a check of the fuel level before each use and
refuel if it is necessary.
• Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.
1825 - 003 - 08.02.2023

Operation

Read and understand the
Gasoline is very
Do not use the fuel tank as
Incorrect type of fuel can
5. Install the terminal cover on the negative (-) terminal
on the battery.
To do before you start the product
WARNING:
product, carefully read and understand
the safety instructions and the operation
instructions.
1. Do a check of the engine oil level. Refer to
check of the engine oil level on page 29 .
2. Fill the fuel tank with fuel. Refer to
page 15 .
3. Make sure that the fuel shut-off valve is open. The
fuel shut-off valve is open when the tab is in the
direction of the fuel hose.
4. Make sure that the drive system is engaged. Refer to
To engage and disengage the drive system on page
16 .
5. Put the cutting deck in the highest position. Refer to
To set the cutting height (TS 112) on page 17 or To
set the cutting height (TS 114) on page 17 .
Before you operate the
To do a
To fill fuel on
15