What To Do If Your Appliance Does Not Work; What To Do When The Suction Performance Reduces - LG VC391 H Series Manual

If your appliance is fitted with a fabric
dust bag follow the same instructions as
above. Empty it and reuse it (23). Do not
wash it.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not
fitted correctly.
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter (26) and to clean it by tapping to
remover the dirt and then replacing it in the
vacuum cleaner.
Changing the air outlet filter
• To change the filter or wash the HEPA
filter(28), push the HEPA locker (27), then
remove the washable HEPA filter (28)
from the HEPA frame (29) and clean it.
• Clean the washable HEPA filter with water
at least once a year.
• The washable HEPA filter should be
cleaned with cold and running water at
least once a year.
- Do not use the brush.
- Allow HEPA filter to dry in a shaded
place for a day.
Mini turbine nozzle (optional) (30)
• Mini turbine is used for stairs and other
hard to reach places.
• To clean the mini turbine nozzle, remove
the nozzle cover: (34)
Remove 2 screws on the bottom and take
mini turbine nozzle cover off as shown.
• Frequently clean and remove hair, string,
and lint build-up in the brush area. Failure
to do so could damage to mini turbine
nozzle.
WARNING
Please do not hold the hose when we lift
the main body off the floor (31).
Please never close the filter cover like (32),
to avoid nipping your hand.
Please check that the inlet of damper (33)
is not jammed by dust and pet hair.
What to do if your appliance
does not work?
Check that the appliance is correctly
plugged in and that the electrical socket is
working.
What to do when the suction
performance reduces?
• Stop the appliance and unplug it.
• Check that the tubes, flexible hose and
cleaning tool are not blocked.
• Check that the dust bag is not full.Replace
if necessary.
- 13 -
E