Advertisement
Adjusting the power level
• Electronic power control (11)
Suction capacity increases steplessly up
to MAX.
String the cleaner
When you have switched off and
unplugged the appliance, press on the
button (19) to automatically rewind the
cord.(depending on model)
• Use storage clip as shown when
storing the cleaner (12)
Changing the dust bag
The dustbag needs changing when the
cleaner is set to maximum power and
the cleaner head is off the floor but the
" bag full" indicator window (13) is
completely coloured red.
Even if the dustbag does not appear to
be full at this stage, it should be
changed.
It could be that a great deal of very fine
dust has clogged up the pores of the
dust bag.
• Turn off the appliance and unplug it.
• Remove hose.
• Open the cover (14)
Your appliance is equipped with either a
paper dust bag or a fabric dust bag (15)
• Push the lever forwards in the
direction of the arrow the full paper
filter bag towards the rear. Remove
the bag and throw it away.
• Insert the new paper filter bag into the unit
with the arrow pointing downwards (17)
If your appliance is fitted with a
dust bag, empty it and replace it.
Note: as the appliance is fitted with a
safety device which checks that the bag
is in place you cannot close the lid if the
bag is not fitted correctly.
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and
the motor. Each time that you change
the air outlet filter we advise you to
remove the motor filter (18) and to
clean it by tapping to remove the dirt
and then replacing it in the vacuum
cleaner.
• The working life of this set is 7 years
since the date of delivery to the
consumer. Upon the expiry of the said
period, it might be unsuitable for the
use according to their destination.
• Turbine brush nozzle (20)
- Air adjustment
: use for hard floor & short type carpet.
: carpet use for long type carpet.
-
Cleaning turbine brush nozzle
Press the button on the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
What to do if your appliance
does not work
Check that the appliance is correctly
plugged in and that the electrical socket
is working.
What to do when the suction
performance reduces?
• Stop the appliance and unplug it.
• Check that the tubes, flexible hose
and cleaning tool are not blocked.
• Check that the dust bag is not full.
Replace it if necessary.
• Check that the air outlet filter is not
blocked. Replace it if necessary.
- 5 -
E
21
22
23
Advertisement
