Optimising The Focus And Brightness For A Touched Position - Panasonic LUMIX DC-TZ90 Operating Instructions For Advanced Features

Optimising the focus and brightness for a touched position

Recording mode:
→ [Custom] → [Touch Settings] → [Touch AF] → [AF+AE]
1
Touch the subject you want to optimise the brightness
for
• The AF area setting screen appears.
• The brightness optimisation position is displayed on the centre of
the AF area. The position follows the movement of the AF area.
• [Metering Mode] is set to [
[Touch AE].
• Touching [Reset] returns the brightness optimisation position and
the AF area to the centre.
2
Touch [Set]
• The AF area with the same function as [
• If you touch [
When the background has become too bright, etc., the
brightness contrast with the background can be adjusted by
compensating the exposure.
●
When recording with the Touch Shutter, the focus and brightness are optimised for the touched
position before recording takes place.
●
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
●
The [AF+AE] does not function in the following cases:
• When using the Digital Zoom
• When recording using [4K Live Cropping]
102
Focus, Brightness (Exposure) and Colour tone Settings
(→98)
], which is used exclusively for the
] (touch [ ] when [
Taking pictures with Auto Focus
] is displayed on the touched position.
] is set), the setting of [AF+AE] is cancelled.
Reset Reset Set Set
DVQP1304