Operation - Kärcher HD 3.0/20-4 M Ea Operating Manual

Hide thumbs Also See for HD 3.0/20-4 M Ea:
Table of Contents

Advertisement

Available languages

Available languages

Connect filter (order-no. 4.730-
012.0) to suction hose.
Deaerate the appliance:
Unscrew the nozzle.
Switch on the appliance and let it run
until the water exiting is bubble-free.
At the end let the appliance run for
approx. 10 seconds - then switch
off. Repeat the procedure for a cou-
ple of times.
Switch off the appliance and fit the
nozzle again.

Operation

Danger
Risk of explosion!
Do not spray flammable liquids.
If the appliance is used in hazardous
areas (e.g. filling stations) the corre-
sponding safety provisions must be ob-
served.
Caution
Clean engines only at places with cor-
responding oil separators (environ-
mental safety).
High pressure operation
Note
The appliance is equipped with a pres-
sure switch. The motor starts up only
when the lever of the pistol is pulled.
Set the appliance switch to "I".
Unlock the hand-spray gun and pull
the lever of the gun.
Set working pressure and water
quantity by turning (rungless) at the
pressure and quantity regulation (+/
-).
Select spray type
Close the hand spray gun.
Turn the casing of the nozzle till the
desired symbol matches the marking.
Select round or flat spray using
touch-less switching:
Turn the spray-pipe that is inclined
about 45° downward to the left or
the right.
High pressure circular
spray (0°) for specially
stubborn dirt
Flat low pressure spray
(CHEM) for operating us-
ing detergents or cleaning
at low pressure.
High pressure flat spray
(25°) for large dirt areas
Operation with detergent
Warning
Unsuitable detergents can cause dam-
age to the appliance and to the object
to be cleaned. Use only those deter-
gents that have been approved by
Kärcher. Observe the dosage and oth-
er instructions provided with these de-
tergents. For considerate treatment of
the environment use detergent eco-
nomically.
Follow the safety instructions for using
detergents.
Kärcher detergents ensure smooth
functioning. Please consult us or ask
for our catalogue or our detergent in-
formation sheets.
Place the detergent bottle into the
bottle holder on the appliance or
place a detergent container next to
the appliance.. Two different deter-
gents can be simultaneously placed
into the appliance.
Pull the detergent suction hose out
and immerse it into the detergent
bottle or container.
Screw the lid onto the bottle or the
container.
– 7
EN
9

Advertisement

Table of Contents
loading

Table of Contents