Table of Contents
Advertisement
Press the catch on the lid of the dispenser for rinse aid
1.
and lift
.
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it from the tub.
3.
Spilled rinse aid can cause excessive frothing during
the wash cycle.
Close the lid of the dispenser for rinse aid.
4.
a The lid clicks into position.
9.2 Setting the amount of rinse aid
If there are streaks or water spots on dishware, change
the amount of rinse aid.
Press
.
1.
1 2 3
To open the appliance settings, press the
2.
seconds.
a The refill indicator for rinse aid flashes.
2
1
max
button for 3
A
1 2 3
Press
repeatedly until the right amount of rinse aid
3.
has been set.
1
2
0, 1, 2 or 3 LEDs will light up accordingly.
The factory setting is level 2.
– A low setting adds less rinse aid during the wash
cycle and reduces streaking on dishware.
– A higher setting adds more rinse aid during the wash
cycle, reduces water spots and improves the drying
result.
To store the setting, press the
4.
9.3 Switching off the amount of rinse aid to
be dispensed
Press
.
1.
1 2 3
To open the appliance settings, press
2.
seconds.
a The refill indicator for rinse aid flashes.
Press
repeatedly until no LED lights up.
3.
a The rinse aid system is switched off and the rinse aid
refill indicator is deactivated.
To store the setting, press
4.
Detergent
10 Detergent
Find out which detergents are suitable for your appliance.
Detergent
10.1 The correct detergents
Only use detergents that are made for dishwashers, either
basic or combination detergents.
For the best washing and drying results, use a separate
detergent, then add Rinse aid → Page 14 separately.
Modern, powerful detergents mainly use a low-alkaline
formulation with enzymes. Enzymes break down starch
and remove protein. Oxygen-based bleaching agents are
generally used to remove colored stains, e.g. tea or
ketchup.
Detergent en-us
3
A
button for 3 seconds.
button for 3
A
button for 3 seconds.
A
15
Hide quick links:
Advertisement
Table of Contents
