Download Print this page

Handling And Operation; General Notes On Handling And Operation; Switching The Devices On/Off - Silvercrest SPDP 18 A1 Short Manual

Hide thumbs Also See for SPDP 18 A1:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
7#
Guide the securing strap 
it twice through the strap buckle. Tighten the securing strap 
To remove the securing strap 
release it from the strap buckle. To remove the securing strap 
from the DVD player completely, pull it out of the brackets on the
back of the DVD player  A .
To release the angle bracket from the clamp, press the release but-
tons on the right and left of the angle bracket and simultaneously
pull it out.
Now attach the second monitor  B to the other headrest in the
same way.
SPDP 18 A1
around the headrest supports and push
7#
7#
from the headrest supports,

Handling and operation

.

General notes on handling and operation

Operating the device using the controls on the
player or remote control
The DVD player  A and the second monitor  B have a number of
controls and buttons that you can use to control the main functions.
In addition to the basic controls, the remote control  C also provides
numerous additional options for using all the functions of your device.
These operating instructions refer mainly to the buttons on the
remote control  C . If the instructions refer to the controls of the
DVD player  A or the second monitor B , it will be expressly stated.
If you select a function that is not possible with the inserted media or
not available in the current mode or at the current time, the
appears on the screen.
Switching the devices on/off
7#
There is an ON/OFF switch (
and the second monitor  B .
NOTE
Switching off the DVD player  A also switches off the power to
the second monitor  B .
Slide the ON/OFF switch (
to switch on the devices.
The power LEDs (
Slide the ON/OFF switch (
tion to switch off the devices.
The power LEDs (
NOTE
If the device does not receive any signals for 15 minutes, it will
automatically switch to power-saving mode.
To quit power-saving mode, press the DISPLAY ON/OFF button
on the remote control. Alternatively, you can move the ON/OFF
w
2@
) to the right to the OFF position and then back to
switch (
the ON position.
w
2@
) on the top of the DVD player  A
w
2@
) to the left into the ON position
s
2%
) light up blue when switched on.
w
2@
) to the right into the OFF posi-
s
2%
) turn off.
icon
3&
GB │ IE
 9

Advertisement

loading

This manual is also suitable for:

411102 2204