Handling And Operation; General Notes On Handling And Operation; Switching The Devices On/Off - Silvercrest SPDP 18 A1 Manual

Hide thumbs Also See for SPDP 18 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
Guide the securing strap 
7#
it twice through the strap buckle . Tighten the securing strap 
To remove the securing strap 
release it from the strap buckle . To remove the securing strap 
from the DVD player completely, pull it out of the brackets on the
back of the DVD player  A .
To release the angle bracket from the clamp, press the release but-
tons on the right and left of the angle bracket and simultaneously
pull it out .
Now attach the second monitor  B to the other headrest in the
same way .
SPDP 18 A1
around the headrest supports and push
7#
from the headrest supports,
7#

Handling and operation

.

General notes on handling and operation

Operating the device using the controls on the
player or remote control
The DVD player  A and the second monitor  B have a number of
controls and buttons that you can use to control the main functions .
In addition to the basic controls, the remote control  C also provides
numerous additional options for using all the functions of your device .
These operating instructions refer mainly to the buttons on the
remote control  C . If the instructions refer to the controls of the
DVD player  A or the second monitor B , it will be expressly stated .
If you select a function that is not possible with the inserted media or
not available in the current mode or at the current time, the
appears on the screen.

Switching the devices on/off

7#
There is an ON/OFF switch (
and the second monitor  B .
NOTE
Switching off the DVD player  A also switches off the power to
the second monitor  B .
Slide the ON/OFF switch (
to switch on the devices .
The power LEDs (
Slide the ON/OFF switch (
tion to switch off the devices .
The power LEDs (
NOTE
If the device does not receive any signals for 15 minutes, it will
automatically switch to power-saving mode .
To quit power-saving mode, press the DISPLAY ON/OFF button
on the remote control . Alternatively, you can move the ON/OFF
switch (
) to the right to the OFF position and then back to
w
2@
the ON position .
) on the top of the DVD player  A
w
2@
) to the left into the ON position
w
2@
) light up blue when switched on .
s
2%
) to the right into the OFF posi-
w
2@
) turn off .
s
2%
icon
3&
GB │ IE
 31

Advertisement

Table of Contents
loading

Table of Contents