Headphone Connection; Use; Switching The Dvd Player On And Off; Operation - Silvercrest KH 6504 Operating Instructions Manual

Kompernass portable dvd player operating instructions
Table of Contents

Advertisement

Connecting the antenna cable
1.
Insert your house antenna's 75Ω antenna
cable plug into the
the DVD player.

6.5 Headphone connection

Attention!
Only use the supplied type HX206-001
headphones.
You can connect headphones with a 3.5 mm stereo
jack plug to the DVD player. The headphones con-
nection is located on the side of the device. When
you have connected the headphones, the loudspeakers
are disconnected and you will only hear sound via
the headphones.
Insert the jack plug of the headphones into the
headphone connection.
Important!
Listening to music with headphones for
long periods and at high volume levels
can lead to hearing damage!
ANT
socket on the side of

7. Use

Carry out the required connections as descri-
bed in chapter 6 and provide a power supply.
Lift up the TFT display screen.
7.1 Switching the DVD player on and
off
POWER ON/OFF
Set the
to switch the DVD player on.
The TFT display screen switches on and the back-
ground image appears.
If no disc is inserted into the disc tray the notice
LOADING will appear briefly followed by the
notice NO DISC.
To switch the DVD player off again set the
POWER ON/OFF

7.2 Operation

Buttons on the device and the remote control
Most of the functions described in this manual can
be set using the buttons on the remote control or
also the buttons on the device. However, in these
instructions the buttons on the remote control are
described. If a button on the device is meant this
will be specifically mentioned.
Display settings
FUNCTION
Press the
settings. The settings can be accessed at any
time.
With the control buttons select one of the inputs
Bright, Contrast, Color, Zoom or Reset.
With the control buttons
change the value.
To exit the settings press the
again.
To reset the setting select the input Reset and
press the control button
- 13 -
ON
switch to the
switch to the OFF position.
button to access the display
you can
FUNCTION
.
position
button

Advertisement

Table of Contents
loading

Table of Contents