Table of Contents
Advertisement
Optical Parts Disassemblies
m
Locations and Directions
When the optical parts in the optical unit mounting or assembling, the
parts must be mounted in the specified location and direction as
shown in figure below.
2
3
4
5
6
7
8
10
11
1
B
356
-19-
Key No. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
- Mount the lens as shown in the figure.
- The arrows in the figure indelicate the mount direction
of the part for the replacement. Check the number on
the arrows and mount each part according to its note;
A: The printed part no. comes to this side.
B: The cutting corner comes to this side up.
C: Film sheet attached side comes to this side.
15
13
9
15
12
Condenser lens(IN)
Mirror (W)
Integrator lens(OUT)
Prism beam splitter (PBS)
Condenser lens (OUT)
Dichroic mirror (B)
Dichroic mirror (G)
Condenser lens (G)
Condenser lens (B)
Relay lens (IN)
Mirror (R)
Condenser lens (R)
Mirror (B)
Optical filter (UV cut)
Pre-polarized glass-B (IN)
Fig.7
Advertisement
Table of Contents
