Advertisement
VLT® Control Panel LCP 32
Installation Guide
2 Installation
2.1 Mounting the LCP 32
Procedure
1.
Position the bottom of the LCP 32 in the drive.
2.
Push the top of the LCP 32 into place.
When mounting the LCP 32, do not push or press too hard!
-
If it is not possible to mount the LCP 32 in one easy operation directly on the drive, try to insert LCP 32 before
mounting the terminal cover. When the terminal cover is removed and the drive is powered, do not touch the
power terminals.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogs, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already
agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | Danfoss A/S © 2020.11
N O T I C E
*130R0961*
*M0027201*
Installation
AN359636476228en-000101 / 130R0961
Advertisement
