Siemens LITHOSTAR Multiline Installation And Setting Instructions Manual page 6

6
Fig. 4
Fig. 6
Systems with serial no. < 06045
•
Place the probe holder on the
lateral support and mark the upper
mounting hole (Fig. 5).
•
Cover the drilling side to prevent drill chips
from falling into the unit.
•
Drill a
•
Remove any drill chips.
Tab. 2
LITHOSTAR Multiline
System
Installing the Ultrasound Localizer
5
∅
6 mm hole.
Fig. 5
Fig. 7
Systems with serial no. 06045
•
Remove the plastic plug from the front
mounting hole of the probe holder (Fig. 5).
•
Install the probe cable inside the probe
holder (Fig. 6).
•
Place any excessive cable length inside
the holder.
•
Mount the probe holder.
RXL2-120.033.01
Rev. 03 11.01
Page 6 of 14
CS PS 24
Siemens AG
Medical Solutions