Siemens LITHOSTAR Multiline Installation And Setting Instructions Manual page 2

2
Document revision level
The document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise
authorized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated
with or authorized by Siemens or one of its affiliates are directed to contact one of the
local offices of Siemens or one of its affiliates before attempting installation or service pro-
cedures.
General
Safety note
NOTICE
Checks and adjustments which must be performed with radiationswitched on are identi-
fied with the radiation symbol
of adjustments.
Protective conductor test
Perform the protective conductor test according to TI 236 / ARTD - 002.731.17... after
completing all service work and reattaching all covers. The protective conductor resis-
tance must not exceed 0.2 ohms.
Tools required
•
Standard installation tools
•
Power drill
•
Jigsaw with saw blade for wood
Documents required
•
Adjustment of software parameters...
NOTICE
LITHOSTAR Multiline
System
Installing the Ultrasound Localizer
When performing service work and tests, observe the product-
specific safety information contained in the system documenta-
tion as well as the safety information contained in Register 2 of
the TI folder.
. Radiation protection must be worn during these types
The option is functional only if the system is upgraded with soft-
ware Update (UI SP 013 / 01).
RXL2-120.033.01
Rev. 03
RXL2-120.032....
Page 2 of 14
11.01 CS PS 24
1
1
1
1
1
1
1
Siemens AG
Medical Solutions