Siemens LITHOSTAR Multiline Installation And Setting Instructions Manual page 4

4
Fig. 1
NOTICE
Unpacking / assembling the ultrasound system
•
The SONOLINE Prima does not require any special installation instructions. All you need
to do is unpack the unit as described in the "unpacking procedure" affixed to the outside
of the unit and attah the accessories.
Mechanical modifications on LITHOSTAR Multiline
Preparation
•
Turn the system On.
•
Move the Multiline to position "0".
•
Move the W drive to the gel position.
•
Raise the table top to the upper end position.
•
Move the unit all the way back to the end position (in X direction).
•
Remove the right side panel from the unit.
•
Remove the inner right hand cover from the coupling system (1/Fig. 1).
•
Disconnect the internal probe plug X20.
LITHOSTAR Multiline
System
Installing the Ultrasound Localizer
1
Observe ESD regulations to avoid damage.
RXL2-120.033.01
Rev. 03 11.01
Page 4 of 14
CS PS 24
1
1
1
Siemens AG
Medical Solutions