Page 2
ENGLISH (Original instructions) FIG. A FIG. B FIG. C FIG. D FIG. E FIG. F f The illustratrions are for representative purposes only, they can differ from actual product.
DO NOT RETURN THIS PRODUCT TO THE shock if your body is earthed or STORE, first contact your local grounded. BLACK+DECKER o ce or nearest c. Do not expose power tools to rain or wet authorized service center. conditions. Water entering a power tool General safety rules will increase the risk of electric shock.
Page 4
Do not force the power tool. Use the correct power tool for your application. manufacturer, authorized BLACK+DECKER Service Center or The correct power tool will do the job an equally qualified person in order better and safer at the rate for which it to avoid damage or injury.
Page 5
ENGLISH (Original instructions) 2. Lock-on button • Set the drilling depth as described below. 3. Forward/reverse slider (Only for HD500) • Tighten the side handle by turning the grip clockwise. 4. Drilling mode selector Fitting a drill bit or screwdriver bit 5.
(Only for HD500) Service Information • Slacken the side handle (7) by turning the grip counterclockwise. BLACK+DECKER o ers a full network of companyowned and authorized service • Set the depth stop (6) to the desired locations. All BLACK+DECKER Service position.