Cooper Lighting CGP500WL WQ500 Instruction Manual page 2

Congratulations. You have purchased a Regent 500 watt halogen
floodlight. This floodlight is perfect for security lighting or for illuminating
signs, recreational areas, and buildings.
What you need
• Screwdriver
• Adjustable wrench
What's included
• Light fixture (A)
• 500 watt halogen bulb (B)
• Mounting arm (C)
• Locknut (D)
• Coverplate (E)
What to know
• For outdoor use only.
• UL and CSA LISTED for wet
locations.
• Fixture must be connected to 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Fixture should be mounted to a grounded junction box marked for use
in wet locations.
• Keep away from flammable objects. Do not mount body of
fixture within 1" of any combustible material.
• The bulb and fixture get extremely hot during use.
• Always replace bulb with the same or lower wattage than the bulb
included. Installing a higher wattage bulb could create a fire hazard
and shorten the life of the bulb. Use of higher wattage bulbs will void
the warranty.
• Never touch the bulb with your bare hands. Handle the bulb with gloves
or a soft cloth. Oil from your skin can cause premature failure.
• For maximum bulb life, position light so that
the halogen bulb remains within 4 degrees of
horizontal.
• If lens is replaced, use only tempered safety
glass of equal thickness.
• Fixture should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system and the
method of electrically connecting the fixture to it must be in accordance
with the National Electrical Code and local building codes.
CGP500WL (Bronze)
WQ500, CWQ500 (White)
A
B
2
GP500WL,
C
D
E
4°