Download Print this page
Cooper Lighting Corelite Junction Box Structure Interface Installation Manual
Cooper Lighting Corelite Junction Box Structure Interface Installation Manual

Cooper Lighting Corelite Junction Box Structure Interface Installation Manual

Junction box structure interface (connection at ceiling) double swivel pendant pipe mounting

Advertisement

Quick Links

Corelite
Corelite luminaires are precision tooled for
simple trouble free contractor installation.
The Pendant/Cross-Bar Interface mounts
directly to a standard 4" octagon junction box.
MOUNT DETAILS
POWER
PENDANT WIRE
(BY OTHERS)
SWIVEL BALL
3/8" PENDANT
5" CANOPY
1/4 IPS NUT
FULL SWIVEL COVER
FULL SWIVEL
3/8" PENDANT
POWER (2-D)
CONNECTION AT CEILING
1. Layout mounting locations.
2. Ensure that power feed is at the UL end of the fixture.
Power feed: to be installed to local/national electrical
codes by a Certified Electrician.
3. Secure junction boxes to structure.
4. Secure cross bar to junction box.
*
MOUNTS LOCATIONS
DISTANCES ARE EQUAL TO FIXTURE LENGTH
PLUS OR MINUS DIMENSIONS BELOW
FIXTURE FAMILY DIM "A"
- 1 1/8"
CLASS A
- 1 1/8"
FEROS
- 1 1/8"
RADIUS
- 1 1/8"
IRIDUM
- 2 3/8"
STELLAR
0"
RAVE
- 1 1/8"
MINIGATOR
+ 5/8"
NAVIGATOR II
*For continuous rows see joining sheet.
1
COOPER
Lighting
*FOR ALL CORELITE SUSPENDED LUMINAIRES
4" OCTAGONAL BOX
w/ CROSS SUPPORT
(BY OTHERS)
SWIVEL BALL
APPROPRIATE
HARDWARE
TO STRUCTURE
(BY OTHERS)
DIM "B"
DIM "C" DIM "D"
- 1 1/8"
0"
0"
- 1 1/8"
0"
0"
- 1 1/8"
0"
0"
- 1 1/8"
0"
0"
- 2 3/8"
0"
0"
0"
0"
0"
- 1 1/8"
0"
0"
- 5/16"
0"
+ 15/16"
JUNCTION BOX STRUCTURE
INTERFACE (Connection at Ceiling)
Double Swivel Pendant Pipe Mounting
NON-POWER
JB SUPPORT BAR
(By Others)
NON-POWER (2-D)
5. Attach pendant to swivel ball and secure using 1/4" IPS lock nut.
6. Feed wires through pendant to allow access in junction box and
connect wires ensuring all connections are properly matched.
7. Slide canopy up pendant and attach to swivel crossbar.
NOMINAL ID FOR ¼ IPS = 9.5mm, 0.375 in.
POWER WIRES CAN RUN THROUGH ANY PENDANT (REFER TO LOCAL/NATIONAL ELECTRICAL CODES).
CONTACT CORELITE FOR CONNECTING POWER AT A JOINT FOR NAVIGATOR II.
SINGLE FIXTURE
DIM "A"
SAMPLE ROW
DIM "B"
Not all options available. Please consult your Cooper Lighting Representative for availability.
Specifications and Dimensions subject to change without notice
INSTALLATION
DD_JB
SWIVEL CROSSBAR
DIM "C"
DIM "D"
SS_JB
ADE080780
Rev. A

Advertisement

loading

This manual is also suitable for:

Corelite dd-jb