Siemens SIMATIC NET S7-1500 Operating Instructions Manual page 59

Hide thumbs Also See for SIMATIC NET S7-1500:
Table of Contents

Advertisement

ATEX / IECEx / UKEX / CCC-Ex
Observe the information in the "Use of subassemblies/modules in a Zone 2 Hazardous Area"
document, which you will find here:
• On the documentation DVD supplied with the product, under:
"All documents" >"Use of subassemblies/modules in a Zone 2 Hazardous Area"
• On the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
The conditions must be met for safe usage of the product according to the section Notes on
use in hazardous areas according to ATEX / UKEX / IECEx / CCC-Ex (Page 25).
The product meets the explosion protection requirements outlined below.
IECEx
Classification: Ex ec IIC T4 Gc, Certificate no.: IECEx DEK 18.0019X
The product meets the requirements of the standards:
• IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• IEC 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
ATEX
Classification: II 3 G Ex ec IIC T4 Gc, Certificate no.:DEKRA 18ATEX0027 X
The product meets the requirements of the standards:
• EN IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
UKEX
Classification: II 3 G Ex ec IIC T4 Gc, Certificate no.:DEKRA 21UKEX0003 X
The product meets the requirements of the standards:
• EN IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
Importer UK: Siemens plc (see above)
CCC-Ex
classification:Ex na IIC T4 Gc
The product meets the requirements of the following standards:
• GB 3836.1
Hazardous areas - Part 0: Equipment - General requirements
• GB 3836.3
Explosive atmospheres - Part 3: Equipment protection by increased safety "e"
• GB 3836.8
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
SIMATIC CM 1542-1
Operating Instructions, 04/2023, C79000-G8976-C355-05
Approvals
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net cm 1542-1

Table of Contents