Rocktron Reaction Dynamic Filter Instruction Manual page 7

Descriptions continued.........
1 SENSITIVITY Control - This control
determines level of attack to cause the effect to
activate.
2 DISTORTION Switch - This switch adds
distortion to the effect. When the switch is in
the distortion is on. When out, the distortion
is off.
3 9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC
OnTap 9V power supply (sold seperately).
4 LEVEL Control - This control determines the
volume of the effect summed to the output.
5 ON/OFF Leds - These LEDs shows if the pedal
is on or off. When the LED is lit the pedal is
on. When the LED is not lit the pedal is off.
6 BATTERY COMPARTMENT and COVER
The 9V battery can be found in this
compartment.