Page 1
12PCS 4 PCS 12PCS 2 PCS 4 PCS 2 PCS CL DL DR CR 8 PCS 12PCS 4 PCS 4 PCS 16 PCS Attach the handle (C) using screw (D) Attach pieces 8, 9, & 10 using screws (G). & cam bolt (A) on piece 6 & 7. Make sure that the built-in ridge is facing inwards and at the bottom.
Page 2
Turn the drawer upside down. Attach the runners E to pieces Line up the holes on the outside pieces 2 and 3 as shown. Use screws (J). with the holes on the runners (EDR & EDL), secure to the drawer using screws (J). Attach cam bolt (A) on piece 1, Slot in piece 5 to the built-in ridges.
Page 3
Put the plastic corner support (H) on the backboard 5 using screws (I) . The unit should now be assemblde and ready to use.