Installing The Camera; Removing The Edp Cable - Dell P26S Owner's Manual

b. Lift the camera away from the display assembly [2].

Installing the camera

1. Place the camera on the display assembly.
2. Connect the camera cable to the connector on the display assembly
3. Install the:
a. display hinges
b. display bezel
c. display assembly
d. WWAN card
e. WLAN card
f. battery
g. base cover
4. Follow the procedure in

Removing the eDP cable

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. WLAN card
d. WWAN card
e. display assembly
f. display bezel
g. display hinges
h. display panel
i. camera
3. Remove the eDP cable from the computer.
After working inside your
Before working inside your
system.
computer.
29