Table of Contents
Advertisement
a. Remove the screws that secure the metal bracket to the system board [1]
b. Lift the metal bracket [2].
c. Remove the screws that secure system board to the computer [3].
d. Lift the system board from the computer [6].
Installing the system board
1.
Align the system board with the screw holders on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Place the metal bracket and tighten the screws to secure to the computer.
4.
Connect the speaker, power connector and coin cell battery cables to the connectors on the system
board:
5.
Install the:
a.
display assembly
b.
coin-cell
c.
power connector port
d.
heat sink assembly
e.
WWAN card
f.
WLAN card
g.
dock frame
h.
SSD
i.
memory module
j.
battery
k.
base cover
6.
Follow the procedure in
Removing the keyboard
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
c.
SSD
32
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
