Advertisement
5. Pole Mounting
STEP 1: Place the strap through the slot on the back of the
WNAP-6325 and then around the pole. Tighten the
strap to secure the WNAP-6325.
IMPORTANT SAFETY PRECAUTIONS:
1) LIVES MAY BE AT RISK! Please be aware for
the electric wires around, and tighten the
pole. Carefully read the section "OUTDOOR
INSTALLATION WARNING" in the manual
before installation.
2) Users MUST use the "Power cord and PoE
Caution
Injector"
WNAP-6325. Otherwise, the product might be
damaged.
Default IP Address: 192.168.1.253
Default Username: admin
Default Password: admin
Default SSID: WNAP-6325
STEP 1: The Web management allows you to access and
manage the wireless AP easily. Launch the Web
browser
and
enter
http://192.168.1.253.
STEP 2: When the login window pops up, please enter the
User Name and Password. The default User Name
and Password are both "admin". Then click OK
button to continue.
For security reasons, it is recommended to change the
password at the first login and memorize it.
shipped
in
the
box
with
– 5 –
the
default
IP
– 7 –
6. Web Login
Connect the WNAP-6325 with your PC by an Ethernet cable
plugging in LAN port of PoE injector in one side and in LAN port of
PC in the other side. Power on the WNAP-6325 by PoE from PoE
injector.
1. Click "Start" button located in the lower-left corner of your
computer.
2. Click "Control Panel".
3. Double-click "Network and Sharing Center" icon.
4. Click "Change Adapter Settings".
5. Double-click "Local Area Connection".
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and
click "Properties".
7. Select "Use the following IP address", and then click
"OK" button twice to save the configuration. For example,
as
192.168.1.253 and the router is 192.168.1.254, then you
may choose from 192.168.1.1 to 192.168.1.252.
the
STEP 3: After you enter into the Web User Interface, go to
address
Further Information:
The
above
configurations of the WNAP-6325. For further configurations of
different operation modes, please refer to the user manual which
you can download from the website.
http://www.planet.com.tw/en/support/download.php?type1=4&
model=48589&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product.
the
default
IP
address
– 6 –
Operation Mode to configure your wireless network.
steps
introduce
the
– 8 –
of
the
WNAP-6325
is
simple
installations
and
2011-E10590-000
Advertisement
