Table of Contents
Advertisement
Additional loading patterns for 10 place settings:
Lower rack
Upper rack
Third rack
12 Basic Operation
Basic Operation
Basic Operation
12.1 Protection against unintentional
operation
Your dishwasher has a built in feature to help prevent
unintentional operation, e.g. by children. After starting the
appliance, the door has to be closed within 4 seconds,
otherwise the operation will be paused. If this occurs,
follow the steps below to restart your dishwasher.
For top button controls: Press
1.
For front button controls: Close the door and press
2.
a The wash cycle will resume.
Notes
¡ Unintentional operation is activated when:
– Pressing Start to begin a wash cycle
– Setting Delay time and pressing Start
– Opening the door while Delay time is active
– Opening the door during a wash cycle.
¡ This feature cannot be deactivated.
12.2 Switching on the appliance
Touch
with a short 1 second touch.
▶
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
Press the right cycle button.
▶
a The cycle is set and the cycle button flashes.
12.4 Setting options
You can set options to complete the chosen wash
program.
Note: The available options depend on which program is
selected.
Keep pressing the button for options until the
▶
appropriate option is set.
a The additional function is set and the LED flashes.
12.5 Setting the time delay
You can delay the start of the wash cycle via the
Home Connect® app.
Open the Home Connect® app and select the
▶
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
Basic Operation en-us
and close the door.
.
19
Advertisement
Table of Contents
